73 - the spec sheet I have shows:
Bore . . . . . . . 4.165
Stroke . . . . . 3.68
Bore spacing . 4.75
73 - the spec sheet I have shows:
Bore . . . . . . . 4.165
Stroke . . . . . 3.68
Bore spacing . 4.75
" “It is said that men go mad in herds, and only come to their senses slowly, and one by one.." -Charles MacKay
"'The trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.' "
-Ronald Reagan
VOTE
How about a link to that there spreadsheet, bub?
You could add a column for BoreStrokeRatio (BSR) & one for RodStrokeRatio (RSR), those numbers REALLY tell the tale
AMC ENG SPECS page![]()
" “It is said that men go mad in herds, and only come to their senses slowly, and one by one.." -Charles MacKay
"'The trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.' "
-Ronald Reagan
VOTE
would this be the place to have those who have ultrasonically
tested their cylinders - post those results - so we have a fairly accurate overview of cyl. casting thickness / core shifts listed by year ?
I'd even like metallurgy samples to determine which years had the highest nickel content - as the 1970s' had the Vietnam War manufacturing 'happening' at the time - which may or may not have had an effect on stateside materials used by AMC, but Hey...... where's THAT at ....... ;)![]()
Not sure if it means anything to anyone else... I took my old 304 to a recycler today. Oil and coolant drained, complete with oilpan to valve covers, with intake, waterpump, balancer. Total weight on their industrial scale was 680lbs. I wondered why that thing was so hard to get out of my trailer and onto the engine stand originally.
Anyone know the weight of a 258?
They were listed at 515lbs. I shipped a 401 in a crate minus cam and intake and it weighed 480lbs on the scale.
[COLOR=#000000]
Featuring www.StarLabCNC.com[/URL] for CNC plasma machines
1-651-433-3689 TOLL FREE 1-855-433-3689
Got 2 of them I can hang ......... but my deer scale only goes to 250LbsOriginally Posted by SHARPMACHINE
Other than that, I know I can't lift one by myself - been there, tried that
![]()
" “It is said that men go mad in herds, and only come to their senses slowly, and one by one.." -Charles MacKay
"'The trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.' "
-Ronald Reagan
VOTE
what make and size carb. was on a stock 1973-74 amc 401 motor?i'm running an aluminum intake with a 600 edelbrock.seems like it's starving for fuel once in a while.